Note on DualDiscs
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
Basic Operations
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Notes
Notes on Repeat Play
To
Press
If your country or region does not support DAB broadcast, “No
All tracks or files on a disc are played repeatedly up to five times.
Choose the selected
item
/
Service” appears.
(enter) (or ENTER on
“REP1” indicates that a single track or file is repeated until you stop
it.
Do not press any button on the unit or the remote during DAB
Automatic Scan. If scanning is interrupted, run the DAB Automatic
Scan again.
the unit) . You can choose the
selected item much like the center
button on the iPod or the touch
operation of the iPod touch.
Notes on playing MP3 discs
is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Do not save other types of tracks or files or unnecessary folders on a
If you move to another area, repeat this procedure to store the
stations for your new area.
Music discs encoded with copyright
disc that has MP3 files.
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that they are recorded onto
the disc.
protection technologies
is procedure clears all previously stored presets.
Before unplugging the DAB antenna, make sure the system is turned
off to preserve your own DAB settings.
Find a point in a
track or chapter of
audiobook/podcast
/
(fast rewind/fast
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
forward)
during playback, and
release the button at the desired
e system can only play MP3 files that have a file extension of
“.MP3”.
If there are files on the disc that have the “.MP3” file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 files is 511.
is tuner does not support data services.
point.
To use the iPod
Insert an iPod Dock Adapter into the unit’s connector
before use.
/
Return to the
previous menu or
select a menu
/TOOL MENU
(return) . You can return to the
previous menu or select a menu
much like the Menu button on
the iPod or the touch operation
of the iPod touch.
MP3 files and folders that can be contained on a single disc is 512.
License and Trademark Notice
folder levels (the tree structure of files) is 8.
iPod is a trademark of Apple Inc., registered in the U.S.
Compatibility with all MP3 encoding/writing soſtware, recording
device, and recording media cannot be guaranteed. Incompatible MP3
discs may produce noise or interrupted audio or may not play at all.
and other countries.
To use the system as a battery charger
You can use the system as a battery charger for the iPod
when the system is both on and off.
Applicable accessories: Remote commander
“Made for iPod” means that an electronic accessory
has been designed to connect specifically to iPod and
has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
All other trademarks and registered trademarks are of
their respective holders. In this manual, TM and ® marks
are not specified.
Notes on playing multisession discs
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
e charging begins when the iPod is placed on the unit’s
If the disc begins with a CD-DA (or MP3) session, it is recognized as
a CD-DA (or MP3) disc, and other sessions are not played back.
A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
connector . e charging status appears in the iPod
display. For details, see the user’s guide of your iPod.
To remove the iPod Dock Adapter, pull it up with your
fingernail or a flat object using the slot inside the adapter.
To stop charging the iPod
Remove the iPod. If you stop charging the iPod when
is symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste. On certain batteries this
symbol might be used in combination with a chemical
symbol. e chemical symbols for mercury (Hg) or lead
(Pb) are added if the battery contains more than 0.0005%
mercury or 0.004% lead.
By ensuring these batteries are disposed of correctly,
you will help prevent potentially negative consequences
for the environment and human health which could
otherwise be caused by inappropriate waste handling of
the battery. e recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only. To ensure that the battery will
be treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the section on how
to remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
the system is off, press DISPLAY
disappears in the display.
until the clock
Slot
Listening to the radio
Before you can receive DAB, you must complete the
DAB Automatic Scan procedure (see “Before using the
system”).
CAUTION
WARNING
To reduce the risk of fire, do not cover the ventilation
opening of the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked flame sources such as
lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
As the main plug is used to disconnect the unit from the
mains, connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect
the main plug from the AC outlet immediately.
Do not expose batteries or apparatus with battery-installed
to excessive heat such as sunshine, fire or the like.
Excessive sound pressure from earphones and headphones
can cause hearing loss.
e use of optical instruments with this product will
increase eye hazard.
Notes
When placing or removing the iPod, handle the iPod in the same
angle as that of the iPod connector
on the unit and do not twist
is appliance is classified
as a CLASS 1 LASER
product. is marking
is located on the rear
exterior.
or sway the iPod to prevent connector damage.
Do not carry the unit with an iPod set on the connector. Doing so
may cause a malfunction.
1
Select “TUNER DAB,”“TUNER FM”or “TUNER AM.”
Press FUNCTION +/ (or FUNCTION on the unit)
When placing or removing the iPod, brace the unit with one hand
and take care not to press the controls of the iPod by mistake.
Before disconnecting the iPod, pause playback.
repeatedly. You can also select DAB directly by
pressing DAB AUTO SCAN
on the unit.
While playing video, you cannot use
/
. You can fast
2
3
Select the tuning mode.
.
rewind (fast forward) by holding down
/
Notice for customers: the following
information is only applicable
to equipment sold in countries
Press TUNING MODE
appears.
repeatedly until “AUTO”
To change the volume level, use VOLUME +/ (or VOL +/ on the
Note
unit) . e volume level does not change even if adjusted on the
e iPod Dock Adapter is not supplied with the system. Use the
adapter supplied with your iPod when using an iPod model. For
details on the iPod Dock Adapters, refer to the instructions supplied
with the iPod Dock Adapters.
iPod.
Tune in the desired station.
is system is designed for iPod only. You cannot connect any other
portable audio players.
To use an iPod, refer to the user’s guide of your iPod.
Sony cannot accept responsibility in the event that data recorded to
iPod is lost or damaged when using an iPod with this unit.
applying EU directives.
Press +/ (or TUNE +/ on the unit) . Scanning
stops automatically when a station is tuned in, and
then “TUNED” and “STEREO” (for stereo programs
only) appear.
e manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. e
Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters,
please refer to the addresses given in separate service or
guarantee documents.
Adjusting the sound
Changing the display
To adjust the volume
Press VOLUME +/ (or VOL +/ on the unit)
.
is manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or similar
names.
When you tune in a DAB station or an FM station that
provides RDS services, the service name or station
name appears on the display.
To
Press
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
To add a sound effect
Change
DISPLAY
repeatedly when the
when the system
information on the system is on.
To
Press
display1)
Check the clock
when the system
is off2)
To stop automatic scanning (FM/AM bands
only)
Generate a more dynamic DSGX
sound (Dynamic Sound
Generator X-tra)
on the unit.
DISPLAY
is off3). e clock is displayed for
8 seconds.
Press (stop) (or /CANCEL on the unit)
.
Before using the system
Set the sound effect
EQ
repeatedly to select
To tune in a station with a weak signal (FM/AM
bands only)
If “TUNED” does not appear and the scanning does not
1) For example, you can view CD/MP3 disc information, such as;
track or file number during normal play.
track or file name (“ ”) during normal play.
artist name (“ ”) during normal play.
“BASS” or “TREBLE,” and
To use the remote
Hooking up the system securely
then press +/
repeatedly
Slide and remove the battery compartment lid , and
to adjust the level.
stop, press TUNING MODE
repeatedly until “AUTO”
insert the two supplied R6 (size AA) batteries, side
first, matching the polarities shown below.
and “PRESET” disappear, and then press +/ (or TUNE
album or folder name (“
”) during normal play.
Antennas
When carrying this system
total playing time while the player is stopped.
+/ on the unit)
repeatedly to tune in the desired
Find a location and an orientation that provide good reception, and then
1
Remove a disc to protect the CD mechanism.
station.
You can also view DAB station information such as the service
name, channel label, preset number, frequency, DLS (Dynamic Label
Segment), or ensemble label.
set up the antenna.
Playing a CD/MP3 disc
2
Press FUNCTION +/ (or FUNCTION on the unit)
Keep the antennas away from the speaker cords and the power cord to
avoid picking up noise.
To reduce static noise on a weak FM stereo
repeatedly to select the CD function.
2) e clock is displayed continuously while the iPod is being charged.
station
1
Select the CD function.
To turn off the clock display, press DISPLAY
charging the iPod”).
e STANDBY indicator
off.
(See “To stop
3
4
Hold down VOL +
and press
appears.
and DSGX
on the unit,
With a DAB external antenna (not supplied), you can obtain higher
DAB broadcast sound quality. We recommend that you use the supplied
FM/DAB lead antenna only temporarily until you install a DAB external
antenna.
Press FM MODE
repeatedly until “MONO” appears
Press FUNCTION +/ (or FUNCTION on the unit)
on the unit until “STANDBY”
to turn off stereo reception.
3)
repeatedly.
on the unit lights up when the system is
Notes on listening to DAB stations
2
Place a disc.
Press (open/close)
with the label side up on the disc tray.
After “LOCK”appears, unplug the power cord.
When tuning in a DAB station, it may take a few seconds before you
Notes on the display information
Characters that cannot be displayed appear as “_”.
e following are not displayed:
on the unit, and place a disc
hear any sound.
Notes on using the remote
Before unplugging the DAB antenna, make sure the system is turned off to
preserve your own DAB settings.
Primary service is automatically received when secondary service
With normal use, the batteries should last for about six months.
Do not mix an old battery with a new one or mix different types of
batteries.
ends.
total playing time for a CD-DA disc depending on the play mode.
total playing time and remaining playing time for an MP3 disc.
e following are not displayed correctly:
AM loop antenna
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
folder and file names that do not follow either ISO9660 Level 1,
Level 2 or Joliet in the expansion format.
Playing the iPod
To set the clock
Use buttons on the remote to set the clock.
e following is displayed:
ID3 tag information for MP3 files when ID3 version 1 and version
1
Select the iPod function.
2 tags are used (up to 62 characters).
1
2
Turn on the system.
Press FUNCTION +/ (or FUNCTION on the unit)
up to 8 characters of service name, up to 128 characters of DLS
(Dynamic Label Segment) and up to 16 characters of ensemble
label.
To close the disc tray, press (open/close)
unit.
on the
Press (power)
.
repeatedly.
Select the clock set mode.
2
Place the iPod.
Do not force the disc tray closed with your finger, as
this may damage the unit.
FM/DAB lead antenna
(Extend it horizontally.)
Press TIMER MENU . If the current mode appears
on the display, press
/
repeatedly to select
Red
3
Start playback.
White side for North
American model
.
“CLOCK SET?” and then press
(enter)
Using optional audio components
Speakers
Press (play) (or CD (play/pause) on the
Black
Make sure the metal leads (not the part
covered with vinyl insulation) are securely
inserted into the speaker jacks.
3
Set the time.
.
unit)
To connect an optional headphones
Press
press
/
repeatedly to set the hour, and then
(enter) . Use the same procedure to set the
or
Black
Red
To
Press
Connect headphones to the PHONES jack
unit.
on the
Black
minutes.
Pause playback
(pause) (or CD (play/
Right speaker
pause) on the unit)
.
e clock settings are lost when you disconnect the
power cord or if a power failure occurs.
To connect an optional component
Brown side for other regions
To resume play, press the button
again.
Connect additional audio component to the AUDIO
To display the clock when the system is off, press
3
Start playback.
IN jack
on the unit using an audio analog cord (not
Stop playback
(stop) (or /CANCEL on the
DISPLAY . e clock is displayed for about
Red
supplied). Turn down the volume on the system, and
then select the AUDIO IN function.
Press (play) (or iPod (play/pause) on the
.
unit)
8 seconds.
.
unit)
.
Select a folder on an
MP3 disc
+/ (select folder)
To run the DAB Automatic Scan
To control the iPod
You can control your iPod with the following buttons on
the remote or unit.
When you turn on the system for the first time aſter
you purchase the system, DAB Automatic Scan starts
automatically and creates a list of available services.
If you want to run the DAB Automatic Scan again,
perform the procedure below.
Select a track or file
/
(go back/go forward)
.
or
Find a point in a
track or file
Hold down
/
(rewind/
To
Press
FM/DAB lead antenna
(Extend it horizontally.)
fast forward)
during playback,
Pause playback
(pause) (or iPod
and release the button at the
desired point.
or
1
Press DAB AUTO SCAN
on the unit.
(play/pause) on the unit)
or
(stop)
.
“Auto Scan?” and “Push Enter” appear.
Select Repeat Play
REPEAT
repeatedly until
. You can scroll up or
Scroll up/down the
iPod menus
/
“REP” or “REP1” appears.
.
2
Press
(enter)
75-ohm coaxial cable with F male
type connector (not supplied)
To DAB external
down the iPod menus much like
the Click Wheel operations of
the iPod or the drag up-or-down
operations of the iPod touch.
Wall socket
Power
Scanning begins. “” appears. Depending on
the DAB services available in your area, scanning may
take a few minutes.
antenna (not supplied)
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To change the play mode
Press PLAY MODE
stopped. You can select normal play (“
files in the folder on the disc), shuffle play (“SHUF” or
repeatedly while the player is
”
for all MP3
Select a track
/
(go back/go forward)
or chapter of
. To fast-forward or fast-
“
SHUF*”), or program play (“PGM”).
* When playing a CD-DA disc,
(SHUF) Play performs the same
audiobook/podcast
rewind, hold down the button.
operation as normal (shuffle) play.
When scanning is complete, a list of available services
is created.
|